FlexiGear-MD-J36618

13.2kV Switchgear

Product informations: 

• Voltage: 13.2kV
• Configuration: 
  • 1 in 2 out
  • Side to side
• 13.2kV incoming main:
  • Cable gland incoming
  •  13.2kV 600A load break switch (unfused) 
  • Direct drive switch operating 
  • 3x high voltage LED indicators installed directly at the line side of the 15kV switch 
  • 3x 25mm grounding balls on phase (load side of 15kV switch) and 1x on ground bar outside
    the enclosure. Allows uses of temporary grounding cable sets during work on equipment 
• 2x 13.2kV feeder switch:
  • Cable gland incoming and output 
  • 3x high voltage LED indicators installed directly at the line side of the 15kV switch 
• 13.2kV vaccum circuit breaker
  • 20kA - 600A 
  • SEL 751A Overcurrent protection by the micro-processor-based relay
  • Breaker will trip in the event of a problem with the NGR
  • 1x SEL751A with active arc flash detection

General specifications: 

• NEMA 2
• Lifting eye on all 8 corners
• Estimated dimensions and weight:
  •  52’’D x 90’’W x 80’’H
  • 3500 lbs
• All control wiring is SIS type 
• Certification: CSA / RETIE